Question by nasscarman2003: i need a material list to build a deck?
i want to build a deck 18 feet by 10 feet square 52 inches high
Best answer:
Answer by bigg_dogg44
need to know where u live, what area. need to know the grade of ur property. ( does the ground fall or level) need to know how u would like it attached..email me and i can help
bigg_dogg44@yahoo.com
lic. gen. contractor
( if u live in a wind zone u will have to know what level… don’t forget rim joist, do u want to splice ur decking or have solid decking? many states dont allow 4×4’s for pilings here in nc min. is a 6×6. the handrails, if the deck is over 20″ from grade picketts or balusters must be 4″ on center. many, many other ideas and questions)
Know better? Leave your own answer in the comments!
Get Free Website Traffic:
For The Current List Of Top Traffic Exchanges Go To:
October 24th, 2010 at 4:53 am
Take a trip to your local Menard’s with you dimensions. They usually will give good deals on “kits” that include everything from nails and bolts to build what you need. Also gives you ideas on things you can do different, or add. Good luck!
October 24th, 2010 at 5:02 am
Beyond tools, knowledge skill I’ll offer some suggestions.
4 x 4 treated posts
2 x 6 or 2 x 8 treated lumber for joists and supports
deck material, either 2 x or decking lumber in a 7/8th perhaps.
carriage bolts
galvanized deck screws, long enough to hold the top to the joists
Tools certainly
Perhaps concrete to anchor the pilings OR Pier Blocks. Pir Blocks are preformed concrete, and also come with metal bracing/fittings to attach the 4 x 4 uprights.
Anything else, get in touch…
Rev. Steven
October 24th, 2010 at 5:50 am
Go to lowes.com
They have a deck design program that will let you design your deck and give you a parts list.
October 24th, 2010 at 5:57 am
This site is a very good site. I built a round deck around my 24′ pool and was very satisfied with the plans and material list they provided.